Skip to content
Quaestio

Megabits per second to gigabits per second – and gigabits per second to megabits per second

0.1

1 Mbit/s = 0.001 Gbit/s

All units in this category

  • 100,000,000bit/s
  • 100,000kbit/s
  • 100Mbit/s
  • 0.1Gbit/s
  • 12,500,000B/s
  • 12,500kB/s
  • 12.5MB/s
  • 0.0125GB/s

Formula

Multiply the value in megabits per second by 0.001 to get gigabits per second.
Gbit/s = Mbit/s × 0.001

Multiply the value in gigabits per second by 1,000 to get megabits per second.
Mbit/s = Gbit/s × 1,000

How to convert megabits per second to gigabits per second

Type a value in the field above and the result is calculated instantly. Use the arrow button to swap direction, or pick other units from the lists.

Megabits per second to gigabits per second – common values

Megabits per second (Mbit/s)Gigabits per second (Gbit/s)
10.001
20.002
50.005
100.01
250.025
500.05
1000.1
2500.25
5000.5
1,0001

Gigabits per second to megabits per second – common values

Gigabits per second (Gbit/s)Megabits per second (Mbit/s)
11,000
22,000
55,000
1010,000
2525,000
5050,000
100100,000
250250,000
500500,000
1,0001,000,000

About the units

Megabits per second. Megabits per second is the unit broadband, wifi and mobile networks are sold in: a million bits per second, 125,000 bytes per second. The EU open internet regulation requires the contract to explain the minimum, normally available, maximum and advertised speed, but names no unit – the megabit is trade practice. The trap is the factor of eight: 100 megabits per second gives 12.5 megabytes per second in the download window. Networking always counts decimally, while file sizes are often shown in binary.

Gigabits per second. Gigabits per second is a thousand million bits per second, 125 megabytes per second or 1,000 megabits per second. The unit measures fibre connections, data centre networks and Ethernet standards. A 5 GB film takes 40 seconds in theory. Two traps. A gigabit line does not give gigabytes per second – there is the factor of eight. And real throughput is always below the link speed, because the protocols take their share; that is why EU rules separate maximum from normally available speed.

Other common conversions